Network And Access Ports; Installing The Cisco Unified Ip Phone - Cisco 7970G Administration Manual

For cisco unified callmanager 5.1 (sip)
Hide thumbs Also See for 7970G:
Table of Contents

Advertisement

Installing the Cisco Unified IP Phone

Procedure
4.
Connect a Category 3 or 5
straight-through Ethernet
cable from the switch to the
10/100 SW port (Cisco
Unified IP Phone 7970) or
the 10/100/1000 SW port
(Cisco Unified IP Phone
7971G-GE).
Connect a Category 3 or 5
5.
straight-through Ethernet
cable from another network
device, such as a desktop
computer, to the 10/100 PC
port (Cisco Unified
IP Phone 7970) or the
10/100/1000 PC port (Cisco
Unified IP Phone
7971G-GE).
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
3-10
Notes
Each Cisco Unified IP Phone
ships with one Ethernet cable in
the box.
Optional. You can connect
another network device later if
you do not connect one now.
Chapter 3
Setting Up the Cisco Unified IP Phone
Reference
See the
"Network and Access
Ports" section on page 3-5
guidelines.
See the
"Network and Access
Ports" section on page 3-5
guidelines.
for
for
OL-11524-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge

Table of Contents