Power Save Configuration Menu - Cisco 7931G - Unified IP Phone VoIP Administration Manual

Device Configuration Menu
Table 4-8 Media Configuration Menu Options (continued)
Option Description
Enterprise Indicates whether Cisco Unified IP
Advertise G.722 Phones advertise the G.722 codec to
Cisco Unified Communications
Manager. If enabled (default), and if each
endpoint in the attempted call supports
G.722 in its capabilities set, Cisco
Unified Communications Manager
chooses G.722 for the call.
Note
Device Allows you to override the Enterprise
Advertise G.722 Advertise G.722 Codec on a per-phone
basis.
The default is "Use System Default,"
which means that the value configured
for the Enterp G.722 Codec parameter is
used.

Power Save Configuration Menu

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
4-26
When a phone is registered with
a Cisco Unified Communications
Manager that does not support
this setting, the default is
"Disabled."
The Power Save Configuration menu displays the settings that control when the
phone screen backlight turns off to conserve power.
options on this menu.
For detailed information about configuring these settings, see the
Disabling the Cisco Unified IP Phone Backlight" section on page
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone.
Table 4-9 describes the
"Automatically
6-7.
OL-12457-01