Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Displaying a Configuration Menu
Note
Step 1
Step 2
Step 3
Step 4
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
To display a configuration menu, perform these steps.
You can control whether a phone has access to the Settings menu or to options on
this menu by using the Settings Access field in the Cisco Unified CallManager
Administration Phone Configuration page. The Settings Access field accepts
these values:
Enabled—Allows access to the Settings menu.
•
Disabled—Prevents access to the Settings menu.
•
Restricted—Allows access to the User Preferences menu and allows volume
•
changes to be saved. Prevents access to other options on the Settings menu.
If you cannot access an option on the Settings menu, check the Settings Access
field. For more information, see Cisco Unified CallManager Administration
Guide.
Procedure
Press the Settings button to access the Settings menu.
Perform one of these actions to display the Network Configuration menu or the
Device Configuration menu:
Use the Navigation button to select the desired menu and then press the
•
Select softkey.
Use the keypad on the phone to enter the number that corresponds to the
•
menu.
Press the menu name on the touchscreen.
•
To display a sub-menu, repeat
To exit a menu, press the Exit softkey.
Configuration Menus on the Cisco Unified IP Phones 7970G/7971G-GE
Step
2.
4-3