Cisco 7970G Administration Manual page 135

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-12 Media Configuration Menu Options (continued)
Option Description
Recording Tone Indicates the loudness setting for the
Remote Volume beep tone that the remote party
receives. The remote party is the party
who is on a call with the party whose
phone has the Recording Tone option
enabled.
Range: 0 percent to 100 percent. (0
percent is -66 dBM and 100 percent is
-3 dBM.)
Default: 84 percent (-10dBM)
See also: Recording Tone
Recording Tone Indicates the length of time in
Duration milliseconds for which the beep tone
plays.
If the value you configure here is less
than one third the interval, then this
value overrides the default provided by
the Network Locale.
Range: 0 to 3000
Note
See also: Recording Tone
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
For some Network Locales that
use a complex cadence, this
setting applies only to the first
beep tone.
Device Configuration Menu
To Change
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
4-31