Cisco 7970G Administration Manual page 118

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
PC Port Speed and duplex of the access port
Configuration (labeled 10/100 PC on the Cisco Unified
IP Phone 7970, and 10/100/1000 PC
on the Cisco Unified
IP Phone 7971G-GE). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch,
configure the port on the switch to the
same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option,
you must change the SW Port
Configuration option to the same
setting.
PC VLAN Allows the phone to work better with
non-Cisco switches. Strips the 802.1P/Q
tags from the packets going to a PC from
the access port on the phone. The Admin
VLAN ID must be set before you can
change this option.
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
4-14
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock network configuration
1.
options.
Scroll to the PC Port Configuration
2.
option and then press the Edit
softkey.
Scroll to the setting that you want
3.
and then press the Select softkey.
Press the Save softkey.
4.
Unlock network configuration
1.
options.
Make sure the Admin VLAN ID
2.
option is set.
Scroll to the PC VLAN option, press
3.
the Edit softkey, and then enter a
new PC VLAN setting.
Press the Validate softkey and then
4.
press the Save softkey.
OL-11524-01