Firmware Versions Screen - Cisco 7970G Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Firmware Versions Screen

Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
The Firmware Versions screen displays information about the firmware version
running on the phone.
screen.
To display the Firmware Version screen, follow these steps:
Procedure
Press the Settings button.
Select Status.
Select Firmware Versions.
To exit the Firmware Version screen, press the Exit softkey.
Table 7-4 Firmware Version Information
Item
Load File
App Load ID
JVM Load ID
OS Load ID
Boot Load ID
DSP Load ID
Expansion Module 1
Expansion Module 2
Table 7-4 explains the information that is displayed in this
Description
Load file running on the phone
Identifies the JAR file running on the phone
Identifies the Java Virtual Machine (JVM) running
on the phone
Identifies the operating system running on the phone
Identifies the factory-installed load running on the
phone
Identifies the Digital Signal Processor (DSP)
software version used.
Identifies the load running on the Expansion
Module(s), if connected to the phone.
These items are not applicable when running
Note
the SIP protocol.
Status Menu
7-15