Sip Dial Rules; Understanding The Phone Startup Process - Cisco 7970G Administration Manual

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

SIP Dial Rules

Understanding the Phone Startup Process

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
For more information about how the phone interacts with the TFTP server, refer
to the Cisco Unified CallManager System Guide, "Cisco TFTP" chapter.
The TFTP server generates these SIP configuration files:
SIP IP Phone:
•
For unsigned and unencrypted files—SEP<mac>.cnf.xml
–
For signed files—SEP<mac>.cnf.xml.sgn
–
For signed and encrypted files—SEP<mac>.cnf.xml.enc.sgn
–
Dial Plan—<dialplan>.xml
•
Softkey Template—<softkey_template>.xml
•
The filenames are derived from the MAC Address and Description fields in the
Phone Configuration window of Cisco Unified CallManager Administration and
the devicename field in the Cisco Unified CallManager database. The MAC
address uniquely identifies the phone. For more information refer to the Cisco
Unified CallManager Administration Guide.
For Cisco SIP Unified IP phones, the administrator uses dial rules to configure
SIP phone dial plans. These dial plans must be associated with a SIP phone device
to enable dial plans to be sent to the configuration file. If the administrator does
not configure a SIP phone dial plan, the phone does not display any indication of
a dial plan.
For more information on configuring SIP dial rules, refer to the Cisco Unified
CallManager Administration Guide.
When connecting to the VoIP network, the Cisco Unified IP Phone goes through
a standard startup process, as described in
network configuration, not all of these steps may occur on your
Cisco Unified IP Phone.
Understanding the Phone Startup Process
Table 2-4. Depending on your specific
2-9