Chapter 5
Configuring Features, Templates, Services, and Users
Table 5-1
Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Auto Answer
Auto-pickup
Barge
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Description
Connects incoming calls automatically after
a ring or two.
Auto Answer works with either the
speakerphone or headset.
Allows a user to use one-touch, pickup
functionality for call pickup, group call
pickup, and other group call pickup.
Allows a user to join a non-private call on a
shared phone line. Barge features include
cBarge and Barge.
cBarge adds a user to a call and
•
converts it into a conference, allowing
the user and other parties to access
conference features.
Barge adds a user to a call but does not
•
convert the call into a conference.
The phones support Barge in two
conference modes:
Built-in conference bridge at the target
•
device (the phone that is being barged).
This mode uses the Barge softkey.
Shared conference bridge. This mode
•
uses the cBarge softkey.
Telephony Features Available for the Phone
Configuration Reference
Refer to the Cisco Unified
CallManager Administration
Guide, "Configuring Directory
Numbers" chapter.
For more information, refer to:
Cisco Unified CallManager
•
Administration Guide,
"Pickup Group Configuration"
chapter.
Cisco Unified CallManager
•
System Guide, "Call Pickup"
and "Group Call Pickup"
chapter.
For more information, refer to:
Cisco Unified CallManager
•
Administration Guide, "Cisco
Unified IP Phone
Configuration" chapter.
Cisco Unified CallManager
•
System Guide, "Cisco Unified
IP Phones" chapter.
Cisco Unified CallManager
•
Features and Services Guide,
"Barge" and "Privacy"
chapter.
5-3