Power Save Configuration Menu - Cisco 7965G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Power Save Configuration Menu

The Power Save Configuration menu displays the settings that control when the LCD screen on a phone
turns off to conserve power.
For detailed information about configuring these settings, see the
Unified IP Phone Screen" section on page
Table 4-13 Power Save Configuration Menu Options
Option Description
Display On Time Time each day that the LCD screen
turns on automatically (except on the
days specified in the Days Display Not
Active field).
Display On Length of time that the LCD screen
Duration remains on after turning on at the time
shown in the Display On Time option.
Display Idle Length of time that the phone is idle
Timeout before the display turns off. Applies
only when the display was off as
scheduled and was turned on by an
end-user (by pressing a button on the
phone or lifting the handset).
Days Display Not Days that the display does not turn on
Active automatically at the time specified in
the Display On Time option.
Display On If Indicates whether the LCD screen
Incoming Call automatically illuminates when a call is
received.
OL-12650-01
Table 4-13
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
describes the options on this menu.
"Automatically Disabling the Cisco
6-7.
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Device Configuration Menu
4-25