Power Save Configuration Menu - Cisco 7945G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Power Save Configuration Menu

The Power Save Configuration menu displays the settings that control when the LCD screen on a phone
turns off to conserve power.
For detailed information about configuring these settings, see the
Unified IP Phone Screen" section on page
Table 4-14 Power Save Configuration Menu Options
Option Description
Display On Time Time each day that the LCD screen turns on automatically
(except on the days specified in the Days Display Not
Active field).
Display On Length of time that the LCD screen remains on after
Duration turning on at the time shown in the Display On Time
option.
Display Idle Length of time that the phone is idle before the display
Timeout turns off. Applies only when the display was off as
scheduled and was turned on by an end-user (by pressing a
button on the phone or lifting the handset).
Days Display Not Days that the display does not turn on automatically at the
Active time specified in the Display On Time option.
Display On If Indicates whether the LCD screen automatically
Incoming Call illuminates when a call is received.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Table 4-14 describes the options on this menu.
6-8.
Device Configuration Menu
"Automatically Disabling the Cisco
To Change
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
4-23