Chapter 6 Customizing The Cisco Unified Ip Phone; Creating Custom Phone Rings - Cisco 7970G Administration Manual

Creating Custom Phone Rings

Creating Custom Phone Rings
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
6-2
You can obtain a copy of the Ringlist.xml and List.xml files from the system
using the following admin command-line interface (CLI) "file" commands:
admin:file
•
file list*
–
file view*
–
file search*
–
file get*
–
file dump*
–
file tail*
–
file delete*
–
The Cisco Unified IP Phone ships with two default ring types that are
implemented in hardware: Chirp1 and Chirp2. Cisco Unified CallManager also
provides a default set of additional phone ring sounds that are implemented in
software as pulse code modulation (PCM) files. The PCM files, along with an
XML file (named Ringlist.xml) that describes the ring list options that are
available at your site, exist in the TFTP directory on each
Cisco Unified CallManager server.
The following sections describe how you can customize the phone rings that are
available at your site by creating PCM files and editing the Ringlist.xml file:
Ringlist.xml File Format Requirements, page 6-3
•
PCM File Requirements for Custom Ring Types, page 6-4
•
Configuring a Custom Phone Ring, page 6-4
•
Chapter 6 Customizing the Cisco Unified IP Phone
OL-11524-01