Setting Up Services - Cisco 7970G Administration Manual

Setting Up Services

Setting Up Services
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
5-16
To configure softkey templates, select Device > Device Settings > Softkey
Template from Cisco Unified CallManager Administration. To assign a softkey
template to a phone, use the Softkey Template field in the
Cisco Unified CallManager Administration Phone Configuration page. Refer to
Cisco Unified CallManager Administration Guide, and Cisco Unified
CallManager System Guide for more information.
The Services button on the Cisco Unified IP Phone gives users access to
Cisco Unified IP Phone Services. You can also assign services to the
programmable buttons on the phone (refer to Cisco Unified IP Phone 7970 Series
Guide for more information). These services comprise XML applications that
enable the display of interactive content with text and graphics on the phone.
Examples of services include local movie times, stock quotes, and weather
reports.
Before a user can access any service,
You must use Cisco Unified CallManager Administration to configure
•
available services.
The user must subscribe to services using the Cisco Unified IP Phone User
•
Options application. This web-based application provides a graphical user
interface (GUI) for limited, end-user configuration of IP Phone applications.
Before you set up services, gather the URLs for the sites you want to set up and
verify that users can access those sites from your corporate IP telephony network.
To set up these services, choose Feature > Cisco IP Phone Services from
Cisco Unified CallManager Administration. Refer to Cisco Unified CallManager
Administration Guide and Cisco Unified CallManager System Guide for more
information.
Chapter 5 Configuring Features, Templates, Services, and Users
OL-11524-01