Power Save Configuration Menu - Cisco CP-7970G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-15 Media Configuration Menu Options (continued)
Option
Enterprise Advertise
G.722 Codec
Device Advertise G.722
Codec

Power Save Configuration Menu

The Power Save Configuration menu displays the settings that control when the LCD screen on a phone
turns off to conserve power.
For detailed information about configuring these settings, see
IP Phone.
Table 4-16 Power Save Configuration Menu Options
Option
Display On Time
Display On Duration
Display Idle Timeout
Days Display Not
Active
Display On When
Incoming Call
OL-23092-01
Description
Enables/disables (enabled by default) Cisco
Unified IP Phones to advertise the G.722 codec
to Cisco Unified Communications Manager. For
more information, see the Cisco Unified
Communications Manager System Guide,
Unified IP Phones, section Codec Usage.
When a phone is registered with a Cisco
Note
Unified Communications Manager that
does not support this setting, the default
is "Disabled."
Allows you to override the Enterprise Advertise
G.722 Codec on a per-phone basis.
The default is "Use System Default," which
means the value configured for the Enterprise
Advertise G.722 Codec parameter gets used.
Table 4-16
Description
Time each day that the LCD screen turns on
automatically (except on the days specified in
the Days Display Not Active field).
Length of time that the LCD screen remains on
after turning on at the time shown in the Display
On Time option.
Length of time that the phone is idle before the
display turns off. Applies only when the display
was off as scheduled and was turned on by an
end-user (by pressing a button on the phone,
touching the touchscreen, or lifting the handset).
Days that the display does not turn on
automatically at the time specified in the
Display On Time option.
Indicates whether the LCD screen automatically
illuminates when a call is received.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
To Change
From Cisco Unified Communications Manager
Administration and choose System >
Enterprise Parameters.
Cisco
From Cisco Unified Communications Manager
Administration and choose Device > Phone.
describes the options on this menu.
Chapter 6, Customizing the Cisco Unified
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Device Configuration Menu
4-29