Network Configuration - Cisco 7970G Administration Manual

Device Configuration Menu
Table 4-17 Network Configuration Menu Options
Option Description
Load Server Used to optimize installation time for
phone firmware upgrades and offload
the WAN by storing images locally,
negating the need to traverse the WAN
link for each phone's upgrade.
You can set the Load Server to another
TFTP server IP address or name (other
than the TFTP Server 1 or TFTP Server
2) from which the phone firmware can
be retrieved for phone upgrades. When
the Load Server option is set, the phone
contacts the designated server for the
firmware upgrade.
Note
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
4-36
The Load Server option allows
you to specify an alternate
TFTP server for phone
upgrades only. The phone
continues to use TFTP Server 1
or TFTP Server 2 to obtain
configuration files. The Load
Server option does not provide
management of the process and
of the files, such as file transfer,
compression, deletion, and so
on.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
OL-11524-01