Sip General Configuration Menu - Cisco 7970G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-5 SIP General Configuration Menu Options (continued)
Option
Enable VAD
Start Media Port
End Media Port
Backup Proxy
Backup Proxy Port
Emergency Proxy
Emergency Proxy
Port
Outbound Proxy
Outbound Proxy Port Displays the port number of the outbound
NAT Enabled
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Description
Displays if voice activation detection (VAD)
is enabled.
Displays the start Real-Time Transport
Protocol (RTP) range for media.
Displays the end Real-Time Transport
Protocol (RTP) range for media.
Displays the IP address of the backup proxy
server or gateway. This value will always be
set to USECALLMANAGER.
Displays the port number of the backup proxy
server or gateway. This value will always be
set to 5060.
Displays the IP address of the emergency
proxy server or gateway. This value will
always be set to USECALLMANAGER.
Displays the port number of the emergency
proxy server or gateway. This value will
always be set to 5060.
Displays the IP address of the outbound proxy
server. This value will always be set to
USECALLMANAGER.
proxy server. This value will always be set to
5060.
Displays if Network Address Translation
(NAT) is enabled. This value will always be
set to false.
Device Configuration Menu
To Change
Use Cisco Unified
CallManager Administration >
Device > Device Settings >
SIP Profile.
Use Cisco Unified
CallManager Administration >
Device > Device Settings >
SIP Profile.
Use Cisco Unified
CallManager Administration >
Device > Device Settings >
SIP Profile.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
4-19