Configuring Startup Network Settings; Configuring Security On The Cisco Unified Ip Phone - Cisco 7970G Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Configuring Startup Network Settings

Configuring Security on the Cisco Unified IP Phone

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
The main LCD screen displays:
6.
Current date and time
–
Primary directory number
–
Additional directory numbers and speed dial numbers, if configured
–
Softkeys
–
If the phone successfully passes through these stages, it has started up properly.
If the phone does not start up properly, see the
section on page 9-2.
If you are not using DHCP in your network, you must configure these network
settings on the Cisco Unified IP Phone after installing the phone on the network:
IP address
•
IP subnet mask
•
• Default gateway IP address
TFTP server IP address
•
You may also configure these optional settings as necessary:
Domain name
•
DNS server IP address
•
Collect this information and see the instructions in
Settings on the Cisco Unified IP Phone."
The security features protect against several threats, including threats to the
identity of the phone and to data. These features establish and maintain
authenticated communication streams between the phone and the
Cisco Unified CallManager server, and digitally sign files before they are
delivered.
Configuring Startup Network Settings
"Resolving Startup Problems"
Chapter 4, "Configuring
3-17