Table of Contents
Advertisement
ICP-CC488 | Installation Guide | 4.0 Remote Radio Transmitter Operations
Table 15: Fault Analysis Conditions
Zone Indicator
Fault Description
1
System fault
2
RF low battery
3
Zone Tamper Alarm
4
Sensor watch fail
5
RF sensor watch
6
Communications fail
4.0 Remote Radio Transmitter
Operations
The ICP-CC488 Control Panel can be remotely
operated using hand-held remote radio transmitters.
You can use either a 2-button or a 4-button hand-
held transmitter to operate the system.
Figure 7:
RF3332: 2-Button Keyfob
Transmitter
1
1 – Arm button
2 – Disarm button
3 – Arm and Disarm buttons: Press both buttons
at same time for 2 sec to send a Panic alarm
Bosch Security Systems, Inc. | 12/08 | F01U089457-02
Hold Down Button
1
2
3
4
5
6
2
3
The 2-button and 4-button hand-held transmitters
can remotely arm and disarm the system in AWAY
Mode or STAY Mode 1, and can activate remote
Panic Alarms. The 4-button hand-held transmitter
has the added ability to operate the control panel's
programmable outputs to activate a garage door or
outside lights, for example.
Zone Indicator
Fault Condition
1
Low battery
2
Date and time
3
RF receiver jamming
RF receiver tamper switch
RF receiver communications fail
4
Horn speaker
5
Telephone line fail
6
EEPROM fail
7
AUX Power Supply fail
1 to 16
Zones 1 to 16 RF low battery
1 to 16
Zones 1 to 16 Tamper Alarm
1 to 16
Zones 1 to 16 sensor watch fail
1 to 16
Zones 1 to 16 RF sensor watch fail
1
Receiver 1 fail
2
Receiver 2 fail
Figure 8:
RF3334: 4-Button Keyfob
Transmitter
5
1 – Arm button
2 – Disarm button
3 – Option 1 button
4 – Option 2 button.
5 – Arm and Disarm buttons: Press both buttons
at same time for 2 sec to send a Panic alarm
EN | 20
1
2
3
4
Advertisement
Table of Contents
