Radio Transmitter Operations; Alarms; Duress Alarm; Panic Alarm - Bosch ICP-CC404 User Manual

ICP-CC404 | User's Guide | 7.0
7.0 Radio Transmitter
Operations
Figure 3: RE012/E: 2-Channel Keyfob
Transmitter
1
3
1 – Button 1: Arm or disarm in AWAY Mode
2 – Button 2: Arm or disarm STAY Mode
3 – Buttons 1 and 2: Press both buttons at the
same time to activate Panic alarm.
Figure 4: RE013/E: 4-Channel Keyfob
Transmitter
1
3
2
4
1 – Button 1: Arm or disarm in AWAY Mode
2 – Button 2: Arm or disarm in STAY Mode
3 – Buttons 1 and 2: Press both buttons at the
same time to activate Panic alarm.
4 – Buttons 3 and 4: Your security company
can program these buttons for optional
operation, such as operating a garage
door.
Bosch Security Systems, Inc. | 10/08 | F01U089400-01

Radio Transmitter Operations

Audible and Visual Indications
When using hand-held keyfob transmitters to operate
the system, your security company can program the
keyfobs to sound the horn speaker or operate the
blue strobe light. These indications allow you to
operate the system from outside the premises with
confidence.
Table 8: Keyfob Audible and Visual Indications
2
Indication
One beep
Two beeps
Two-tone beep
3-sec strobe
6-sec strobe

8.0 Alarms

8.1

Duress Alarm

A codepad duress alarm is used as a silent hold-up
alarm. This only occurs when a user adds 9 to the
end of a valid user code when disarming the system
(for example, [2 5 8 0 9 #]). A duress alarm is only
useful if your system reports back to a monitoring
station or pocket pager, because domestic reporting
(such as a mobile phone) cannot decipher which type
of alarm occurred.
Figure 5: ICP-CP508W LED Codepad Showing
8.2

Panic Alarm

An audible alarm activates when you press [1] and
[3] or [*] and [#] simultaneously. Contact your
installer to disable the ability to activate the codepad
panic alarm or to silence the codepad panic alarm.
Definition
System disarmed.
System armed in AWAY Mode.
System armed in STAY Mode.
System disarmed.
System armed in AWAY or STAY
Mode.
Audible Alarm Buttons
9