Tray 2/3 Feed Roller And Nudger Roller; Removing The Tray 2/3 Feed Roller And Nudger Roller - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual
Network color printer phaser 1235 series
Hide thumbs
Also See for 1235DT - Phaser Color Solid Ink Printer:
- Brochure & specs (4 pages) ,
- Advanced features and troubleshooting manual (144 pages) ,
- Service quick reference manual (13 pages)
Table of Contents
Advertisement
Tray 2/3 feed roller and nudger roller
Warning
Switch off the power and disconnect the power cord.
1.
Remove paper tray 2/3.
2.
Release the locking tab on the left end of the feed roller.
3.
Slide the feed roller to the left and remove.
4.
Release the locking tab on the left end of the nudger roller.
5.
Slide the nudger roller to the left and remove.
Removing the tray 2/3 feed roller and nudger roller
Reverse these steps to install the tray 2/3 feed roller and nudger roller.
Service Guide
185
Advertisement
Table of Contents
Troubleshooting
