Paper transport roll guide
Warning
Switch off the power and disconnect the power cord.
1.
Remove the printer from the optional paper feeder.
2.
Remove the paper tray from the feeder.
3.
Remove the four screws securing the feeder control board cover plate.
Remove the plate.
Removing the feeder control board cover plate
4.
Remove the idler roller assembly as shown on page 164.
5.
Remove the inner frame as shown on page 166.
6.
Remove the two screws securing the paper transport roll guide to the
inner frame.
7.
Carefully pull down and out on the center of the guide to release the
two locking tabs.
Service Guide
175