Registration Motor Assembly; Removing The Registration Motor Assembly - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual

Registration motor assembly

Warning
Switch off the power and disconnect the power cord.
1.
Open top cover. Remove the drum/toner cartridge basket. Cover the
basket in a lightproof black bag and store in a safe place.
2.
Open the front cover.
3. Remove the right-side cover as described in the topic "Right-side
cover" on page 89.
4. Remove the registration clutch as detailed in "Registration clutch" on
page 133.
5. Remove the screws securing the motor bracket to the printer.
6.
Remove the registration motor assembly.
7. Disconnect the harness from the registration motor.
8.
If replacing the motor, remove the two screws securing the motor to the
motor bracket.

Removing the registration motor assembly

Reverse these steps to install the registration motor assembly.
134 Phaser 1235 Network Color Printer