Registration Roller Assembly B - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual

Registration roller assembly B

Warning Switch off the power and disconnect the power cord.
1. Remove tray 1.
2.
Open the top cover. Remove the drum/toner cartridge basket. Cover
the basket in a lightproof black bag and store in a safe place.
3. Open front cover.
4.
Open front cover inner baffle.
5. Remove duplex unit if installed.
6.
Remove the right-side cover as described in the topic "Right-side cover"
on page 89.
7. Remove the right shield plate as described in the topic "Right shield
plate" on page 93.
8.
Remove registration clutch as detailed in the topic "Registration clutch"
on page 133.
9.
Remove the four screws securing registration roller assembly B to the
printer.
Service Guide 137