Test Printing; Test Print Menu - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual

Test printing

1.
Enter the diagnosis mode by pressing and holding the Menu (1) and
Enter (4) keys as you turn on the printer.
2.
Press the Menu (1, 5) keys to scroll through the list of test until
appears on the upper display.
PRINT
3. Press the Item (2, 6) keys to scroll through the list of test print items
until the desired print option is displayed.
4.
With a test print menu item displayed, press the Value (3, 7) keys to
scroll through the printing options of that item, such as which tray to
print from and to print in blank-and-white or color.

Test Print menu

Display Set Value
PRINT -
EXECUTE
TEST 1
PATTERN
2
3
4
5
6
7 - 14
CASSETTE TRAY1
TRAY2
TRAY3
FF
NONE
COLOR ON*
OFF
FUSER ON*
OFF
DUPLEX ON*
OFF
Function
Press Value (3) to start printing. Press Value (7) to stop printing.
Selection of Printing Patterns
1: LED Head Drive Pattern
2: Color Registration Adjust Pattern
3: Reserved
4: Gray pattern
5: Thin lines
6: Colored stripes
7 thru 14: Blank
Lets you select the source of paper for the test print.
Lets you select between color or monochrome printing
Lets you select between the fuser heater being on or off.
Lets you select between single-sided or double-sided printing.
TEST
Service Guide 71