Switch Scans And The Sensor And Switches Test - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual

Switch scans and the sensor and switches test

Switch or
sensor
not used
Manual Bypass
Feeder OHP
Sensor
Tray 1, Size 1
Switch - (Top)
Tray 1, Size 2
Switch
Tray 1, Size 3
Switch
Tray 1, Size 4
Switch - (Bottom)
Color
Registration
(Left) - 006
Color
Registration
(Right) - 00A
not used
not used
Upper Fuser
Thermistor - 00D
not used
Lower Fuser
Thermistor - 00F
not used
Humidity Sensor
Temperature
Sensor
not used
not used
Duplex In Sensor Switch Scan 11
Duplex Rear
Sensor
66 Phaser 1235 Network Color Printer
Switch scan test
Switch Scan 06
3=
Switch Scan 06
4=
Switch Scan 07
1=
Switch Scan 07
2=
Switch Scan 07
3=
Switch Scan 07
4=
Switch Scan 08
1=
Switch Scan 08
2=
Switch Scan 08
3=
Switch Scan 08
4=
Switch Scan 09
1=
Switch Scan 09
2=
Switch Scan 09
3=
Switch Scan 09
4=
Switch Scan 10
1=
Switch Scan 10
2=
Switch Scan 10
3=
Switch Scan 10
4=
1=
Switch Scan 11
2=
Test result Details
not used
L - Transparency Manual feed a sheet of paper film thru
H - Paper the feeder. Transparency film causes no
change
L - Actuated Remove the tray and actuate the sensor
H - Deactuated flags on right side of tray cavity
L - Actuated
H - Deactuated
L - Actuated
H - Deactuated
L - Actuated
H - Deactuated
Density Value Color value in hexidecimal format. The
***H default is 094
Density Value Color value in hexidecimal format. The
***H default is 073
not used
not used
Encoded fuser Temperature is encoded as a
roller temperature hexidecimal value. The default is
between 16 and A1.
not used
Encoded fuser Temperature is encoded as a
roller temperature hexidecimal value. The default is
between 16 and A1.
not used
Encoded Default - 036
environmental
humidity
Encoded Default - 21E
environmental
temperature
not used
not used
L - Deactuated Pull out the duplex unit. Lift its cover.
H - Actuated Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.
L - Deactuated Pull out the duplex unit. Lift its cover.
H - Actuated Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.