Consumable count initialization
This test menu item allows you to initialize the print engine's consumable counts
and registration set points.
1.
Enter the diagnosis mode by pressing and holding the Menu (1) and
Enter (4) keys as you turn on the printer.
2.
Press the Menu (1, 5) keys to scroll through the list of test until
appears on the upper display.
INITIAL
3.
Press the Item (2, 6) keys to select either Table 1 or Table 2. The tables
determine which NVRAM items will be initialized. Refer to the tables
printed below.
4.
Press and hold Value (3) for 10 seconds to initialize the items of the
selected table. The front panel display
times.
5.
Press Enter (4) to exit the test mode.
Table 1: Initialization items - consumables
Initialization
Item
Drum Counter
Black
Yellow
Magenta
Cyan
Belt Unit
Counter
Fuser Unit
Counter
Toner Counter
Black
Yellow
Magenta
Cyan
Detail
Initializes the drum counter's count
after the replacement of a drum.
Initializes the print count after the
replacement of a transfer belt unit.
Initializes the fuser's print count after
the replacement of a fuser unit.
Initializes the toner use count after a
toner cartridge is replaced
blinks eight
NV-RAM INITIAL
Service Guide
NV-RAM
73