Drive Assembly Components; Main Motor Assembly - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual
Network color printer phaser 1235 series
Hide thumbs
Also See for 1235DT - Phaser Color Solid Ink Printer:
- Brochure & specs (4 pages) ,
- Advanced features and troubleshooting manual (144 pages) ,
- Service quick reference manual (13 pages)
Table of Contents
Advertisement
Drive assembly components
Main motor assembly
Note
Switch off the power and disconnect the power cord.
1.
Remove the electrical chassis as detailed in "Electrical chassis (card
cage)" on page 94.
2.
Remove the printer unit chassis as detailed on page 97.
3.
Free the harnesses from the channel along the right side of the main
motor assembly.
4.
Disconnect the ribbon cable from the high voltage power supply.
5.
Remove the four screws securing the main motor assembly to the
frame.
6.
Lift the front of the main motor assembly about 2 cm (3/4 in.)
7.
Carefully thread the high-voltage power supply fan harness through
the harness guide and main motor assembly before lifting.
Service Guide
151
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 1235DT - Phaser Color Solid Ink Printer and is the answer not in the manual?