Front Cover - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual

Front cover

Warning Switch off the power and disconnect the power cord.
1. Remove Tray 1.
2.
Open the top cover. Remove the drum/toner cartridge basket. Cover
the basket in a lightproof black bag to protect the drum units from light
and store in a safe place.
3.
Open the front cover.
4.
Open the front cover inner baffle.
5. Carefully press the right side of the front cover to the left until the hinge
pin disconnects from the printer.
Note
If the printer is sitting on an optional lower tray assembly, prop
the front of the printer up about 12 mm (1/2 in.) to remove the
front cover and inner baffle.
6.
Slide the front cover and inner baffle to the right and remove.
Removing the front cover
Reverse these steps to install the front cover.
Service Guide 91