Supported CMP/Memory Module Configurations
TABLE: Supported CMP/Memory Module Configurations on page 104
supported CMP/memory module configurations, as viewed from the front of the
server.
TABLE:
Configuration
One CMP/memory pair
Two CMP/memory pairs
Three CMP/memory pairs
Four CMP/memory pairs
(full configurations)
Related Information
"CMP and Memory Module Device Identifiers" on page 103
■
"Performing Node Reconfiguration" on page 155
■
Servicing FB-DIMMs
Up to 16 FB-DIMMs can be installed in each CMP/memory module pair.
Related Information
"Managing Faults" on page 9
■
"Remove FB-DIMMs" on page 105
■
"Install FB-DIMMs" on page 105
■
"Verify FB-DIMM Replacement" on page 106
■
"Add FB-DIMMs" on page 109
■
"Supported FB-DIMM Configurations" on page 110
■
"FB-DIMM Device Identifiers" on page 112
■
"FB-DIMM Fault Button Locations" on page 113
■
"Servicing CMP/Memory Modules" on page 98
■
"Performing Node Reconfiguration" on page 155
■
104
SPARC Enterprise T5440 Server Service Manual • July 2009
Supported CMP/Memory Module Configurations
CMP3
MEM3
X
CMP1
CMP2
MEM1
MEM2
X
X
X
X
X
shows the
CMP0
MEM0
X
X
X
X