Returning The Server To Operation - Fujitsu SPARC Enterprise T5440 Service Manual

Returning the Server to Operation

These topics describe how to return the SPARC Enterprise T5440 and SPARC
Enterprise T5440 servers to operation after you have performed service procedures.
Caution – Never attempt to run the server with the cover removed. Hazardous
voltage is present.
Caution – Equipment damage could occur if you run the server with the cover
removed. The cover must be in place for proper air flow.
Topic
Install the top cover after servicing internal
components.
Re-attach the server to the cabinet slide rails
after performing a bench procedure.
Slide the server back into the equipment
rack.
Re-attach power cords and data cables to the
back panel of the server.
Power on the server after performing a
service procedure.
Related Information
"Preparing to Service the System" on page 59
■
"Servicing Customer-Replaceable Units" on page 71
■
"Servicing Field-Replaceable Units" on page 115
■
Links
"Install the Top Cover" on page 150
"Install the Server Into the Rack" on
page 150
"Slide the Server Into the Rack" on page 151
"Connect the Power Cords to the Server" on
page 153
"Power On the Server" on page 153
149