Remove The Front I/O Board - Fujitsu SPARC Enterprise T5440 Service Manual

Related Information
"Infrastructure Boards and Cables" on page 1
■
"Front Panel Diagram" on page 3
■
"Servicing the Front Control Panel" on page 144
■

▼ Remove the Front I/O Board

Before you begin, complete these tasks:
Read the section,
■
Power off the server, using one of the methods described in the section,
■
Off the System" on page
"Disconnect Power Cords From the Server" on page 65
■
"Remove the Server From the Rack" on page 67
■
"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 69
■
"Remove the Top Cover" on page 69
■
"Remove a Fan Tray" on page 83
■
"Remove the Fan Tray Carriage" on page 129
■
1. Unplug the front control panel cable from J9901 on the motherboard.
2. Unplug the front control panel cable from the front I/O board.
3. Remove the two No. 2 Phillips screws.
"Safety Information" on page
63.
59.
Servicing Field-Replaceable Units
"Powering
147