Fujitsu SPARC Enterprise T5440 Service Manual page 185

1. Download the reconf.pl script, available at:
(https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI
-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=
IORSC-SP-E54440SV-G-F@CDS-CDS_SMI)
2. Copy the reconf.pl script to the root directory of the "miniroot" of the
netinstall image. This is the Solaris_10/Tools/Boot directory of your
exported Solaris 10 8/07, Solaris 10 5/08, or Solaris 10 10/08 OS image on your
JumpStart server.
3. Power off the system.
4. Log into the ALOM compatibility shell. Type:
sc> setsc sys_ioreconfigure nextboot
5. Power on the system.
6. Boot from the network. Type:
ok boot -s
7. Mount the system boot disk under the /mnt directory. Type:
# mount /dev/dsk/c0t0d0s0 /mnt
8. Change to the root directory of your boot disk and copy the reconf.pl script to
the root of the boot disk. Type:
# cd /mnt
9. Do one of the following:
If your Jumpstart server is exporting Solaris 10 8/07 or Solaris 10 5/08, type:
■
# cp /reconf.pl .
If your Jumpstart server is exporting Solaris 10 10/08, type:
■
# cp /cdrom/Solaris_10/Tools/Boot/reconf.pl .
10. Run the reconf.pl script. Type:
# /mnt/reconf.pl
Performing Node Reconfiguration 159