Fujitsu SPARC Enterprise T5440 Service Manual page 121

"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 69
■
"Remove the Top Cover" on page 69
■
1. Identify the correct slot for installation.
See
Guidelines" on page
2. Open the PCIe card latch.
3. Remove the PCIe filler panel.
4. Insert the PCIe card into its slot.
Installing a PCIe Card
FIGURE:
5. Close the PCIe card latch.
Next Steps
"Install the Top Cover" on page 150
■
"Slide the Server Into the Rack" on page 151
■
"Power On the Server" on page 153
■
"PCIe Device Identifiers" on page 96
97.
and "PCIe Slot Configuration
Servicing Customer-Replaceable Units 95