Detecting Faults Using Sunvts Software; Verify Installation Of Sunvts Software - Fujitsu SPARC Enterprise T5440 Service Manual

1623 Fri Feb 15 18:57:27 2008 Chassis Log major
Feb 15 18:57:27 ERROR: Degraded configuration: system operating at
reduced capacity
1622 Fri Feb 15 18:57:27 2008 Chassis Log major
Feb 15 18:57:27 ERROR: [CMP0] /MB/CPU0/CMP0/BR1 neither channel
populated with DIMM0 Branch 1 not configured

Detecting Faults Using SunVTS Software

The SunVTS software features a Java-based browser environment, an ASCII-based
screen interface, and a command-line interface. For more information about how to
use the SunVTS software, see the SunVTS 7.0 User's Guide.
The Solaris OS must be running in order to use the SunVTS software. You also must
ensure that the SunVTS validation test software is installed on your system.
This section describes the tasks necessary to use SunVTS software to exercise your
server.
Related Information
"Diagnostic Flowchart" on page 11
■
"Verify Installation of SunVTS Software" on page 38
■
"Start the SunVTS Browser Environment" on page 39
■
"SunVTS Software Packages" on page 41
■
"Useful SunVTS Tests" on page 42
■
SPARC Enterprise T5440 Server Administration Guide
■
SunVTS 7.0 User's Guide
■

▼ Verify Installation of SunVTS Software

To perform this procedure, the Solaris OS must be running on the server, and you
must have access to the Solaris command line.
Note – The SunVTS 7.0 software, and future compatible versions, are supported on
the server.
38 SPARC Enterprise T5440 Server Service Manual • July 2009