Remove The Flex Cable Assembly - Fujitsu SPARC Enterprise T5440 Service Manual

"Servicing the Power Distribution Board" on page 126
■
"Servicing the Hard Drive Backplane" on page 132
■
"Servicing the Motherboard" on page 135
■

▼ Remove the Flex Cable Assembly

Before you begin, complete these tasks:
Read the section,
■
Power off the server, using one of the methods described in the section,
■
Off the System" on page
"Extend the Server to the Maintenance Position" on page 66
■
"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 69
■
"Remove the Top Cover" on page 69
■
Do the following:
1. Unplug the power cords.
2. Remove the flex cable retainer.
Loosen the captive No.2 Phillips screw and lift the retainer up and out of the
chassis.
"Safety Information" on page
63.
59.
Servicing Field-Replaceable Units
"Powering
141