▼ Install a PCIe Card
1. Identify the correct slot for installation.
2. Open the PCIe card latch.
Installing a PCIe Card
FIGURE:
3. Insert the PCIe card into its slot.
4. Close the PCIe card latch.
Next Steps
"Install the Top Cover" on page 150
■
"Slide the Server Into the Rack" on page 151
■
"Power On the Server" on page 153
■
▼ Add a PCIe Card
Before you begin, complete these tasks:
Read the section,
■
Power off the server, using one of the methods described in the section,
■
Off the System" on page
"Disconnect Power Cords From the Server" on page 65
■
"Extend the Server to the Maintenance Position" on page 66
■
94
SPARC Enterprise T5440 Server Service Manual • July 2009
"Safety Information" on page
63.
59.
"Powering