Fujitsu SPARC Enterprise T5440 Service Manual page 83

ALOM CMT Parameters and POST Modes
TABLE:
Normal Diagnostic Mode
Parameter (Default Settings)
diag_trigger power-on-reset
error-reset
diag_verbosity normal
Description of POST This is the default POST
execution configuration. This
configuration tests the
system thoroughly, and
suppresses some of the
detailed POST output.
Related Information
"Diagnostic Flowchart" on page 11
■
"Detecting Faults Using LEDs" on page 30
■
"ILOM-to-ALOM CMT Command Reference" on page 53
■
SPARC Enterprise T5440 Server Administration Guide
■
Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server
■
Diagnostic Service
No POST Execution Mode
None
all-resets
N/a
max
POST does not POST runs the full
run, resulting in spectrum of tests
quick system with the maximum
initialization. This output displayed.
is not a suggested
configuration.
Keyswitch Diagnostic
Preset Values
all-resets
max
POST runs the full
spectrum of tests
with the maximum
output displayed.
Managing Faults 57