Fujitsu SPARC Enterprise T5440 Service Manual page 178

FIGURE:
Figure Legend
1
2
2. While pushing on the release buttons, slowly push the server into the rack.
Ensure that the cables do not get in the way.
3. If necessary, re-attach the CMA.
a. Attach the CMA support strut to the inner glide.
b. Attach the CMA to the inner glide.
4. Reconnect the cables to the back of the server.
If the CMA is in the way, slide the server partially out of the cabinet to access the
necessary rear panel connections.
152 SPARC Enterprise T5440 Server Service Manual • July 2009
Slide Rail Release Button Location
Inner rail release button
Slide rail lock
Slide the hinge plate into the end of the outer rail until the retaining pin snaps
into place.