"Remove a Fan Tray" on page 83
■
Note – You must remove all four fan trays.
"Remove the Fan Tray Carriage" on page 129
■
1. Remove the CMP/memory module bracket.
The bracket is secured with six captive No. 2 Phillips screws. See
CMP/Memory Module Bracket Captive Screw Locations on page
CMP/Memory Module Bracket Captive Screw Locations
FIGURE:
2. Remove the flex cable retainer.
Loosen the captive No.2 Phillips screw and lift the retainer up and out of the
chassis.
3. Unplug the flex cable from J9801 on the motherboard.
4. Unplug the auxiliary power cable from J9803 on the motherboard.
136
SPARC Enterprise T5440 Server Service Manual • July 2009
FIGURE:
136.