Precaution To Follow Concerning A Cmp/Memory Module Failure; Cable Management Arm - Fujitsu SPARC T5440 User Manual

If a CMP/memory module fails, the CMP/memory module must be replaced. It is
not possible to continue operation simply by degrading a faulty CMP/memory
module.
Precaution to Follow Concerning a CMP/Memory
Module Failure
With this product, all the following IO devices are connected to each CMP.
CMP number 2-CMP configuration
CMP0 Onboard disk drive
Onboard USB port
Onboard DVD drive
PCIe 0-3
CMP1 Onboard 1-gigabit or 10-gigabit network
XAUI
PCIe 4-7
CMP2 ----
CMP3 ----
The IO devices connected to one CMP that has completely failed become unusable.

Cable Management Arm

The following conditions apply to the use of a Cable Management Arm (CMA) on a
SPARC Enterprise T5440 server:
Follow the description in "PCIe Slot Configuration Guidelines" to determine the
■
slot for mounting a PCI card/XAUI card.
The "PCIe Slot Configuration Guidelines" are included in Chapter 4, "Servicing
Customer-Replaceable Unit (CRU)" (under "Servicing PCIe Cards"), in the SPARC
Enterprise T5440 Server Service Manual.
Depending on the type of the selected card (Link Kit/Card using an optical
cable/SCSI card/XVR card/SAS card) and slot, the following conditions apply:
For Slot 0, 1, 2, 3 or 4:
■
Do not route the cables through the CMA itself, but use the free space on top of
the CMA. When a link kit is installed, do not use the CMA.
For Slot 5, 6 or 7:
■
Chapter 2 Important Information About the SPARC Enterprise T5440 Server
4-CMP configuration
<-
<-
<-
PCIe 0,1
<-
<-
PCIe 4,5
PCIe 2,3
PCIe 6,7
23