Extend The Server To The Maintenance Position - Fujitsu SPARC Enterprise T5440 Service Manual

▼ Extend the Server to the Maintenance Position

1. (Optional) Use the set /SYS/LOCATE command from the -> prompt to locate
the system that requires maintenance.
-> set /SYS/LOCATE value=Fast_Blink
Once you have located the server, press the Locator LED and button to turn it off.
2. Verify that no cables will be damaged or will interfere when the server is
extended.
Although the cable management arm (CMA) that is supplied with the server is
hinged to accommodate extending the server, you should ensure that all cables
and cords are capable of extending.
3. From the front of the server, release the two slide release latches
Extending the Server Into the Maintenance Position on page
Squeeze the slide rail locks to release the slide rails.
FIGURE:
Figure Legend
1
2
66 SPARC Enterprise T5440 Server Service Manual • July 2009
Extending the Server Into the Maintenance Position
Slide Rail Lock
Inner Rail Release Button
(FIGURE:
66).