Servicing The Dvd-Rom Drive; Remove The Dvd-Rom Drive - Fujitsu SPARC Enterprise T5440 Service Manual

If you performed any additional service procedures, see
■
page

Servicing the DVD-ROM Drive

You must remove the front bezel before servicing the DVD-ROM drive.
Related Information
"Servicing the Front Bezel" on page 115
■

▼ Remove the DVD-ROM Drive

Before you begin, complete these tasks:
Read the section,
■
Power off the server using one of the methods described in the section,
■
Off the System" on page
"Extend the Server to the Maintenance Position" on page 66
■
"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 69
■
"Remove the Top Cover" on page 69
■
"Remove the Front Bezel" on page 116
■
Do the following:
1. Remove the flex cable retainer.
Loosen the captive No. 2 Phillips screw and lift the retainer up and out of the
chassis.
2. Unplug the DVD-ROM drive from the flex cable assembly.
3. Push the DVD-ROM drive forward until it protrudes from the front of the
chassis.
118 SPARC Enterprise T5440 Server Service Manual • July 2009
153.
"Safety Information" on page
63.
"Power On the Server" on
59.
"Powering