Power Off - Emergency Shutdown; Disconnect Power Cords From The Server; Extending The Server To The Maintenance Position - Fujitsu SPARC Enterprise T5440 Service Manual

▼ Power Off – Emergency Shutdown
Caution – All applications and files will be closed abruptly without saving changes.
File system corruption might occur.
●
Press and hold the Power button for four seconds.

▼ Disconnect Power Cords From the Server

●
Unplug all power cords from the server.
Caution – Because 3.3v standby power is always present in the system, you must
unplug the power cords before accessing any cold-serviceable components.
Extending the Server to the Maintenance
Position
The following components can be serviced with the server in the maintenance
position:
Fan trays
■
CMP/memory modules
■
FB-DIMMs
■
PCIe/XAUI cards
■
Service processor
■
Power supply backplane
■
Hard drive backplane
■
Related Information
"Front Panel Diagram" on page 3
■
"Rear Panel Diagram" on page 5
■
"Extend the Server to the Maintenance Position" on page 66
■
Preparing to Service the System 65