Addition Or Degradation Of Cmp/Memory Modules; Precaution To Follow Concerning A Cmp/Memory Module Failure; Cable Management Arm (Cma) - Fujitsu SPARC ENTERPRISE T5440 User Manual

Addition or Degradation of CMP/Memory
Modules
Degrading or adding CMP/memory modules is not supported.
Do not change the ILOM ioreconfigure parameter to a value other than "false".
Changing the parameter may cause the input path to be rebuilt, which may prevent
the Solaris OS from starting up. For more information on the ioreconfigure
parameter, see the Integrated Lights Out Manager 2.0 Supplement for SPARC Enterprise
T5440 Server.
If a CMP/memory module fails, the CMP/memory module must be replaced. It is
not possible to continue operation simply by degrading a faulty CMP/memory
module.
Precaution to follow concerning a CMP/memory
module failure
With this product, all the following IO devices are connected to each CMP.
CMP number 2-CMP configuration
CMP0 Onboard disk drive
Onboard USB port
Onboard DVD drive
PCIe 0-3
CMP1 Onboard 1-gigabit or 10-gigabit network
XAUI
PCIe 4-7
CMP2 ----
CMP3 ----
The IO devices connected to one CMP that has completely failed become unusable.

Cable Management Arm (CMA)

The following conditions apply to the use of a Cable Management Arm (CMA) on a
SPARC Enterprise T5440 server:
Chapter 2 Important Information About the SPARC Enterprise T5440 Server
4-CMP configuration
<-
<-
<-
PCIe 0,1
<-
<-
PCIe 4,5
PCIe 2,3
PCIe 6,7
17