Expansion Memory; Dual Fax; Dual Fax Settings; Reception Port Selection - Kyocera FAX System 10 Operation Manual

Optional Equipment > Expansion Memory

Expansion Memory

By installing the 128 MB expansion memory, you can increase the image memory size and increase the number of
incoming (faxed) original pages that can be stored. Call a service representative for mounting or removal of the
expansion memory.

Dual FAX

Installing 2 optional FAX Kits (Dual FAX option) allows you to use 2 phone lines. This reduces the time until faxes are
sent to all the recipients in tasks such as sequential broadcast transmissions to multiple recipients. Also, because you
can then send and receive simultaneously, there will be fewer occasions when you cannot receive a fax during fax
transmission.

Dual FAX Settings

Specifying the settings for the second line.
Transmission (page 8-8)

Reception Port Selection

You can make one of the 2 phone lines a receive-only line.
1
2
Display the screen.
[System Menu] key > [FAX] > [Next] of "Reception" > [Next] of "FAX" >
[Change] of "Reception Port"
Configure the settings.
1
Select a receive-only port. If you do not want to set up a receive-only port, select [Off].
2
Select [OK].
9-3