U610 Setting System; Setting The Number Of Lines To Be Ignored When Receiving A Fax At - Kyocera FaxSystem(M) Service Manual

Maintenance
item No.
Setting system 1
U610
Description
Makes settings for fax reception regarding the sizes of the fax paper and received images and automatic print-
ing of the protocol list.
Start
1. Press the start key. The current setting is displayed in each item.
2. Select the item to be set.
Display
CUT LINE (100%)
CUT LINE (AUTO)
CUT LINE (A4)
Setting the number of lines to be ignored when receiving a fax at 100% magnification
Sets the maximum number of lines to be ignored if the received data volume exceeds the recording capacity
when recording the data at 100% magnification. If the number of excess lines is below the setting, those lines
are ignored. If over the setting, they are recorded on the next page.
1. Change the setting using the +/- or numeric keys.
Description
Number of lines to be ignored
when receiving at 100%
Increase the setting if a blank second page is output, and decrease it if the received image does not
include the entire transmitted data.
2. Press the start key. The value is set.
Setting the number of lines to be ignored when receiving a fax in the auto reduction mode
Sets the maximum number of lines to be ignored if the received data volume exceeds the recording capacity
when the data is recorded in the auto reduction mode. If the number of excess lines is below the setting, those
lines are ignored. If over the setting, the entire data on a page is further reduced so that it can be recorded on
the same page.
1. Change the setting using the +/- or numeric keys.
Description
Number of lines to be ignored
when receiving in the auto reduction mode
Increase the setting if a page received in the reduction mode is over-reduced and too much trailing edge
margin is left. Decrease it if the received image does not include all transmitted data.
2. Press the start key. The value is set.
Setting the number of lines to be ignored when receiving a fax (A4R/LetterR) in the auto reduction
mode
Sets the maximum number of lines to be ignored if the received data volume exceeds the recording capacity
when the data is recorded in the auto reduction mode onto A4R or LetterR paper under the conditions below.
If the number of excess lines is below the setting, those lines are ignored. If over the setting, the entire data on
a page is further reduced so that it can be recorded on the same page.
With A4R present and folio absent in the cassette
With letterR paper present and legal paper absent in the cassette
Description
Description
Sets the number of lines to be ignored when receiving a fax at 100%
magnification.
Sets the number of lines to be ignored when receiving a fax in the
auto reduction mode.
Sets the number of lines to be ignored when receiving a fax (A4R/Let-
terR) in the auto reduction mode.
Setting range
0 to 22
Setting range
0 to 22
Initial setting Change in value
per step
3 16 lines
Initial setting Change in value
per step
0 16 lines
3KH-2
1-3-9