Removing And Installing Components - HP Z600 Maintenance And Service Manual

Removing and installing components

NOTE: This workstation supports many optional devices. If you do not find installation instructions for
your device in the following procedures, see http://hp.com/support/workstation_manuals.
This section includes these topics:
Component locations on page 70
Component locations on page 70
Disassembly order on page 72
Predisassembly procedures on page 73
Cable lock (optional) on page 74
Side access panel on page 75
Side access panel solenoid lock
on page 76
Right side panel on page 78
Power supply on page 78
Speaker on page 79
Side access panel sensor (optional)
on page 80
ENWW
Topics
Power connections on page 81
Upper front bezel on page 83
Lower front bezel on page 84
Front panel I/O cable assembly on page 85
Power switch cable assembly on page 88
Optical bay filler tray on page 89
Optical disk drive on page 92
Slot load optical disk drive (optional)
on page 97
Hard disk drive on page 102
System fans on page 120
Removing and installing components
Memory fan on page 122
Memory on page 125
Expansion card slot identification
on page 130
Choosing an expansion card slot
on page 132
PCIe card on page 133
PCI card on page 136
CPU heatsink on page 139
CPU on page 142
System board on page 144
Battery on page 147
69