Capacitive Sensor At The Dispenser Head - Avery Dennison ALS 380 Operating Manual

5 A
FTER OPERATION
5.1 C
ARE AND CLEANING

Capacitive sensor at the dispenser head

Only if the labeller is equipped with a capacitive
sensor [76A] instead of the proper photoelectric sen-
sor:
➔ Remove the knurled thumb screw [76B].
➔
Remove 2 screws on the underside [77A].
➔
Remove the upper part of the housing [78A].
➔
Clean the sensor surfaces [78 arrows] with soft,
lint-free rags.
➔
Reassemble the sensor.
➔
Test the sensor adjustment.
A
[76] A Capacitive sensor
B Knurled thumb screw
[77] A Fastening screws for the housing on the underside
A
[78] A Upper part of the housing with sensor surfaces (arrows)
75
ALS
380
B
A