Automatic Outside Line Selection Group - Panasonic Easa-Phone VA-824 Installation And Programming Manual

Automatic outside line selection group
You can have an outside line which is connected automatically from SLT.
This outside line being not used can be selected automatically by pressing dial key 9.
This will be set whether the outside line is automatically selected or not.
This feature can be also used by the key telephone.
NOTE: When you use this feature, set program and cut the jumper line at the inside of KSU(See page 14).
MODE 2
Key Operation
LCD indication
Remarks
Program
mode
Program
step
Desired
program
mode
Storing
command
End
Not designated
(Initial)
Designated
These program steps are made for each telephone line(COL).
-Either 0 or 1 depending on the
desired program mode.
1 COL 1 Program step LCD indication 1
2 X0203
cu"liv3 3
3 x 0 3 03
co303 3
4 x 0 40 3
cow3 3
COL
Program step LCD indication
5
x 0 5 0 3
cow3 3
6 X 0 60 3
'- CO603 3
7 x0703
c3703 2
8 X 0 8 0 3
~0833 3