Station Hunting Type - Panasonic KX-TD1232NE Programming Manual

[106] Station Hunting Type

Description
Used to enable or disable hunting and set the Station Hunting type for each hunting group.
There are six Station Hunting types available: Circular, Uniform Call Distribution (UCD),
Voice Mail (VM), Automated Attendant (AA), Ring, and No Reply. If circular hunting is
assigned for a group, all of the extensions in the group are hunted until an idle one is found. If
VM hunting is assigned, all of the VM ports of an extension group are hunted until an idle one
is found to allow Voice Mail Service. If AA hunting is assigned, all of the AA ports of an
extension group are hunted until an idle one is found to allow AA Service. If UCD is assigned,
group members are hunted in circular way, starting at the extension following the last one
called. If Ring hunting is assigned, all of the extensions in the group ring simultaneously. If No
Reply hunting is assigned, the extensions in the group are hunted in order of registration for a
programmed interval of time.
Selection
• Hunting group number: 01 through 32
• Disable (no hunting) / Circular / VM(Voice Mail) / AA(automated attendant) / UCD /
RING / No Reply
Default
All hunting groups – Disable
Programming
1.
Enter 106.
Display: Hunt Type
2.
Press NEXT.
Display: Group No?
3.
Enter a hunting group number.
To enter hunting group number 01, you can also press NEXT.
Display example: 01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another hunting group, press NEXT or PREV, or SELECT and the desired
hunting group number.
7.
Repeat steps 4 through 6.
8.
Press END.
General Programming
2.2 System Programming
79