Table of Contents
Advertisement
Line Preference — Outgoing (Idle Line / No Line /
Prime Line)
Description
A PT user can select a desired outgoing line preference to originate calls from the following
three line preferences:
a)
Idle Line Preference
When an extension user goes off-hook to make a call, an idle line is automatically
selected from the pre-assigned lines.
b)
No Line Preference
No line is selected when an extension user goes off-hook to make a call. He or she must
select an appropriate Line Access button to make a call.
c)
Prime Line Preference (default)
When an extension user goes off-hook to make a call, a pre-programmed prime line is
selected automatically.A Prime Line can be selected from the following line access
buttons.
<ICM type PT>
ICM, S-CO, G-CO, L-CO
<DN type PT>
PDN, SDN, S-CO, G-CO, L-CO
Conditions
• This feature is available when there is no incoming call on the extension or when the
extension has set "No Line Preference for incoming calls," that is, "Line Preference-
Incoming" overrides "Line Preference-Outgoing."
• Setting a new line preference feature cancels the previous setting.
• The CO lines available for extension users must be assigned by System Programming.
• Line Preference Override
The extension user can override the Idle / Prime Line Preference temporarily by pressing
the desired line access button (INTERCOM, CO or DN (PDN / SDN)) before going off-
hook; or if Full One-Touch Dialling is enabled, press One-Touch Dialling, DSS, REDIAL,
or SAVE button.
Programming Guide References
• 4.3 Extension Line
– CO Key
– [Preferred Line] Outgoing
Features Guide References
1.6 Originating Features
• Trunk Connection Assignment – Outgoing
Features Guide
1.6 Originating Features
157
Advertisement
Table of Contents
